RS08 P&E Multilink/Cyclone Pro Connection
Connection Procedure
559
Microcontrollers Debugger Manual
Figure 25.10 Choose A Register Block Window
If register files have been installed on the host computer, selecting a block brings up the
Register Block register listing (see Figure 25.11), which shows a list of the associated
registers, their addresses, and their descriptions. This begins the interactive setup of
system registers such as I/O, timer, and COP watchdog.
Figure 25.11 Register Block Register Listing
Selecting a file brings up the Register Window (see Figure 25.12), which displays the
values and significance for each bit in the register. The registers can be viewed and their
values modified, and the values can be stored back into debugger memory.
Figure 25.12 Register Window