Freescale Semiconductor Microcontrollers ADDXPR, ATTRIBUTES

Debugger Engine Commands
Debugger Commands
743 Microcontrollers Debugger Manual
Example:
in>ACTIVATE Memory
Activates the Memory Component and brings the window to the foreground.
ADDXPR
The ADDXPR command adds a new expression in the data component.
Usage
ADDXPR “expression”
Where the parameter expression is an expression to be added and evaluated in the
data component.
Components
Data component.
Example:
in>ADDXPR “counter + 10”
The expression “counter +10” is added in the data component.
ATTRIBUTES
This command is effective for various components as described in the next sections.
In the Command Component
The ATTRIBUTES command allows you to set the display and state options of the
Command component window. The CACHESIZE command sets the cache size in
lines for the Command Line window: The cache size value is between 10 and
1000000.
NOTE Usually this command is not specified interactively by the user. However this
command can be written in a command file or a layout (".HWL") file to save
and reload component window layouts. An interactive equivalent operation is
typically possible, using Simulator/Debugger menus and operations, drag and
drops, etc., as described in the following sections in “Equivalent Operations”.