Freescale Semiconductor Microcontrollers SCDO Command

HC08 Full Chip Simulation
Configuration Procedure
295 Microcontrollers Debugger Manual
Syntax
>SCDI [<n>]
Where:
<n> The value to be entered into the next location in the input buffer
Example
>SCDI $55
Set the next input value to the SCI to $55
>SCDI
Pull up the data window with all the input values.
Figure 11.38 SCI IN Buffer Display
SCDO Command
The SCDO command displays the output buffer from the SCI. A window is opened that
shows all the data that the SCI has shifted out. An arrow is used to point to the last output
value transmitted. The maximum number of output values that the buffer holds is 256
bytes.
Syntax
>SCDO
Example
>SCDO
View data from the output buffer for the SCI simulation.