Freescale Semiconductor Microcontrollers SUBMENU Open Module

Debugger Components
General Debugger Components
88 Microcontrollers Debugger Manual
SUBMENU Open Module
The dialog box shown in Figure 3.31 lists all source files bound to the application. Global
variables from the selected module are displayed in the data component. This is only
supported when the component is in Global scope mode.
Figure 3.31 Open Modules Dialog Box
Drag Out
Table 3.14 describes the drag actions possible from the Data component.
Show
Watchpoints
Opens the Watchpoints Setting dialog box and allows you to view the
list of watchpoints defined in the application. (Refer to Control Points.)
Show
location
Forces all open components to display information about the pointed to
variable (e.g., the Memory component selects the memory range where
the variable is located).
Table 3.14 Dragging Data Possibilities
Destination
Component Window
Action
Command Line Dragging the name appends the address of the variable to
the current command in the Command Line Window.
Dragging the value appends the variable value to the
current command in the Command Line Window.
Memory Dumps memory starting at the address where the selected
variable is located. The memory area where the variable is
located is selected in the memory component.
Table 3.13 Data Context Menu ( continued )
Menu Entry Description