ColdFire V1 Full Chip Simulation Connection
FCS Visualization Utilities
615
Microcontrollers Debugger Manual

Add Channel

The Add Channel dialog box shown in Figure 28.40 allows you to create a new Channel in
the monitor.
Figure 28.40 Add Channel Dialog Box
.
In the text area Object to monitor, enter the object name and bit (e.g., TIM12.PORTT bit
0) and click OK to validate or Cancel to exit.

Monitor Settings

The Monitor Settings dialog box shown in Figure 28.41 allows you to change the time
base.
Select the object name in the list, enter a CPU timer proportional value in the Ticks field
and a number of pixels in the Pixels field to define the horizontal scale. Click OK to
validate or Cancel to exit.
Figure 28.41 Settings Dialog Box