1-2
1-3 Handling the Product
(1) Removing the surface cover
For the inverter of 30HP or less, loosen the mounting screws of the surface cover, then remove the
cover by pulling the top (see Figure 1.3.1).
Fig. 1-3-1 Removing the surface cover (for inverter of 30HP or less)
For the inverter of 40HP or more, remove the six mounting screws of the surface cover, then
remove the surface cover.
Fig. 1-3-2 Removing the surface cover (for inverter of 40HP or more)
(2) Removing the keypad panel
After removing the surface cover as explained in (1), loosen the mounting screws of the keypad
panel and remove as shown in Figure 1.3.3.
Fig. 1-3-3 Removing the keypad panel
Loosen the mounting screws of the keypad panel and remove using the finger holds on the
keypad panel case.
Fig. 1-3-4 Removing the keypad panel (for inverter of 40HP or more)