Fuji Bikes 5000G11S/P11S instruction manual Storage environment

1-4 Carrying

Carry the product by the main unit.

Do not carry the product while holding the cover or parts other than the main unit. Use a crane or hoist to carry a product equipped with hanging holes.

1-5 Storage

			Temporary storage
Temporary storage of this product must meet those conditions listed in Table 1-5-1.
	Table 1-5-1 Storage environment
	Item			Specifications
	Ambient	-10℃(14ºF) to +50℃(122ºF)
	temperature
				Condensation or freezing must not occur as a result of
	Storage	-25℃(-13ºF) to +65℃(149ºF)
	temperature			sudden temperature changes.
	Relative		5 to 95%Note2
	humidity
	Atmosphere	Pollution degree 2
	Air pressure	Operation/storage: 86 to 106 kPa
		Transport	: 70 to 106 kPa

Note1: The storage temperature applies only to short periods such as transport.

Note2: As a large change in temperature within this humidity range may result in condensation or freezing, do not store where such temperature changes may occur.

①Do not place this product directly on a floor.

②To store the product in an extreme environment, pack in vinyl sheet, etc.

③If the product is stored in a high-humidity environment, insert a drying agent (e.g., silica gel) and pack the product in vinyl sheet.

Long-term storage

If the product is to be stored for an extended period after purchase, the method of storage depends primarily on storage location.

The general long-term storage method is as follows:

①The above conditions for temporary storage must be satisfied.

When the storage period exceeds three months, the upper limit of ambient temperature must be reduced to 30℃(86ºF) to prevent the deterioration of the electrolytic capacitors.

②Pack the product thoroughly to eliminate exposure to moisture and include a drying agent to ensure a relative humidity of about 70% or less.

③If the product is mounted on a unit or control panel and is left unused and exposed to the elements like moisture or dust (particularly on a construction site), remove the product and store in a suitable environment.

④Electrolytic capacitors not provided with power for an extended period will deteriorate. Do not store electrolytic capacitors for one year or longer without providing power.

1-3