Fuji Bikes 5000G11S/P11S instruction manual Data copy

4-3-13 Data copy

On the "Program menu" screen, select "9. Data Copy" to display the data copy read screen. A copy operation is then performed in the following order;reading inverter function data, removing the keypad panel, attaching the keypad panel to another inverter, and writing the data to the inverter.

The "verify" feature also makes it possible to compare and check differences in the data stored in the keypad panel and the data stored in the inverter.

Read data

60.00

RUN

PRG⇒PRG MENU

F/D ⇒LED SHIFT

PRG

60.00

1.DATA SETTING 2.DATA CHECK 3.OPR MNTR 4.I/O CHECK

5.MAINTENANC 6.LOAD FCTR 7.ALM INF 8.ALM CAUSE ⇒9.DATA COPY

FUNC

DATA

<DATA COPY>	DATA copy screen
-----

Write data

Attach keypad panel,

Turn power ON.

PRG

60.00

RUN

PRG⇒PRG MENU F/D ⇒LED SHIFT

PRG

60.00

1.DATA SETTING 2.DATA CHECK 3.OPR MNTR 4.I/O CHECK

5.MAINTENANC 6.LOAD FCTR 7.ALM INF 8.ALM CAUSE ⇒9.DATA COPY

When WRITE to the type of the inverter (capacity, voltage and series) is same as the inverter type in copy origin, all of the function will be written. When the type of the inverter is different, the function except the following will be written. However, in both cases, F00(Data protection), P02/A11(Motor capacity), P04/A13 (Motor tuning), H03(Data initializing), H31(RS-485address) and o26/AIO optional adjustment will NOT be written.

- The function which will NOT be copied when different inverter type

FUNC.	NAME	FUNC.	NAME
F03	Max. freq. 1	F26	Motor sound
F04	Base freq. 1	E33	OL function
			(Mode select)
F05	Rated voltage 1	E34	OL function
			(Level)
F06	Max. voltage 1	E35	OL function
			(Timer)
F09	Torque boost 1	E37	OL2 function
			(Level)
	Electronic		Auto-restart
F10	thermal 1	H15	(Holding DC
	(Select)		voltage)
	Electronic	All of
F11	thermal 1	"P"	Motor 1
	(Level)	code
	Electronic	All of
F12	thermal 1
		"A"	Motor 2
	(Thermal time
		code
	constant)
F13	Electronic
	thermal
	overload relay

In addition, when WRITE from inverter ROM No. is new one to old one, WRITE except F01(Freq. command 1) without ERROR display.

READ Mode (read mode)

FUNC

DATA

<DATA COPY>

-----

READ

„„„„ Reading

<DATA COPY>		Data of inverter type
040HP-4
		read by keypad panel
	READ
COMPLETE
„„„„„„„„„„„„„„		Read complete

Remove keypad panel

FUNC	WRITE to the inverter with different
	capacity, voltage and series.
DATA

		Inverter type of data	<DATA COPY>
<DATA COPY>
		stored by keypad panel	040HP-4
040HP-4
				WRITE
	READ
			MEMORY ERROR

∧	FUNC
	DATA
FUNC
DATA	<DATA COPY>
<DATA COPY>
	040HP-4
040HP-4
	WRITE
WRITE	MEMORY ERROR
Mode (write mode)	„„„„

FUNC

DATA

			<DATA COPY>
<DATA COPY>
040HP-4			040HP-4
				WRITE
	WRITE
			COMPLETE		Write
„„„„		Writing	„„„„„„„„„„„„„„„„
					complete

4-13