Fuji Bikes 5000G11S/P11S instruction manual 10-1, Built-in Options

10. Options

10-1 Built-in Options

The inverter supports two internally mounted cards. One option card is mounted under the main cover (Location A) and the other option card is mounted in a special adapter under the keypad (Location B). Only one card can be mounted in these locations. There are two different types of option cards, Type 1 and Type 2. You cannot use two Type 1 or Two Type 2 cards but you can mix any combination of Type 1 and Type 2 provided you only have one option per mounting location. Each option card must be mounted in the designated location. The chart below lists the option card, their types, and their mounting locations.

Name	Type	Loc	2nd Option	Function
			Type/Loc
OPC-G11S-RY	1	A	2/B	• Relay output card
(Relay output card)				The transistor output from the inverter control output
				terminals Y1 and Y4 are converted to the relay
				output (1SPDT).
OPC-G11S-DIO	2	A	None	• Frequency setting by binary code (max. 16 bits)
(Digital interface card)				• Monitoring (8 bits) of frequency, output current, and
				output voltage
OPC-G11S-AIO	2	A	None	• Auxiliary input for analog frequency setting (0 to
(Analog interface card)				+/-10 V)
				• Monitoring of inverter output frequency, current, and
				torque in analog voltage, analog output 0-10 VDC
				and 4-20mA
OPC-G11S-PG	1	A	2/B	• This will enable vector control by pulse generator
(PG Feedback Card)				feedback signal
(G11S only)				• Proportional operation, tuning operation (12/15 V; A,
				B Signal)
OPC-G11S-PG2	1	A	2/B	• This will enable vector control by pulse generator
(PG Feedback Card)				feedback signal
(G11S only)				• Proportional operation, tuning operation (5V; A, not
				A, B, not B Signals)
OPC-G11S-SY	1	A	2/B	• Two motors are driven synchronously.
(Synchronized operation card)
(G11S only)
OPC-G11S-PDP	2	B	1/A	• Serial communication card for Profibus-DP
(Communication card)
OPC-G11S-DEV	2	B	1/A	• Serial communication card for Device Net
(Communication card)
OPC-G11S-COP	2	B	1/A	• Serial communication card for CAN
(Communication card)
OPC-G11S-MBP	2	B	1/A	• Serial communication card for Modbus plus
(Communication card)
OPC-G11S-IBS	2	B	1/A	• Serial communication card for Interbus-S
(Communication card)

10-1