Fuji Bikes 5000G11S/P11S Operating Keypad Panel Operation Mode, Setting digital frequency

4-3 Operating Keypad Panel

4-3-1 Operation Mode

The screen for normal inverter operation includes a screen for displaying inverter operating status and an operation guide and a screen for graphically displaying the operating status in the form of a bar graph. Switching between both screens is possible using the E45 function.

1) Operation guide (E45=0)

60.00

STOP

PRG ⇒ PRG

MENU

F/D ⇒LED SHIFT

2) Bar graph (E45=1)

60.00

RUN	FWD	Rotating direction (no operation command, blank, yes: FWD/REV)
		Operating status (no operation command, STOP, yes: RUN)
PRG ⇒ PRG
MENU
F/D ⇒LED SHIFT

60.00

Hz

A

%

Fout/Iout/TRQ

Output frequency (maximum frequency at full-scale) Output current (200% of inverter rating at full-scale) Torque calculation value (200% of motor rating at full-scale)

4-3-2 Setting digital frequency

On the operation mode screen, press ∧ or ∨ to display the set frequency on the LED. Data is

initially incremented and decremented in the smallest possible unit. Holding down ∧ or ∨

increases or decreases the speed of increment or decrement. The digit to change data can be selected

using	SHIFT>>	and then data can be set directly. To save the frequency settings, press			FUNCDATA	.
Press		and		to return to the operation mode.
	RESET		PRG

If keypad panel settings are not selected, the present frequency setting mode appears on the LCD. When selecting the PID function, PID command can be set with a process value. (Refer to technical documentation for details).

1)Digital (keypad panel) settings (F01=0 or C30=0)

60.00

RUN

PRG ⇒ PRG MENU F/D⇒LED SHIFT

∧ ∨

60.00

<DIG.SET Hz>

LOCAL

50 − 400

F/D⇒DATA SET

56.89 Frequency setting value

		<DIG.SET Hz>	Screen explanation
∧	∨	LOCAL	Present frequency setting mode
		50 − 400
			Frequency setting range
		F/D⇒DATA SET
			Operations guide
		STORING...	When FUNCDATA pressed and writing data

2) Other than digital setting

60.00

RUN

PRG⇒PRG MENU F/D⇒LED SHIFT

∧ ∨

	60.00	Frequency setting value
<REMOTE REF>		Screen explanation
	12+V1	Present frequency setting mode
F/D⇒DATA SET		Operation guide

4-4