Fuji Bikes 5000G11S/P11S instruction manual Appearance of Keypad Panel

4. Keypad Panel

The keypad panel has various functions for specifying operations such as keypad operation (frequency setting, run/stop command), confirming and changing function data, confirming status, and copying. Review the use of each function before commencing running.

The keypad panel can also be removed or inserted during running. However, if the keypad panel is removed during a keypad panel operation (e.g., run/stop, frequency setting), the inverter stops and outputs an alarm.

4-1 Appearance of Keypad Panel

Control keys (valid during keypad panel operation): Used for inverter run and stop

FED	: Forward operation command
REV	: Reverse operation command

STOP : Stop command

Operation keys:

Used for screen switching, data change, frequency setting, etc.

LED monitor:

Four-digit 7-segment display

Used to display various items of monitored data such as setting frequency, output frequency and alarm code.

Auxiliary information indication for LED monitor:

Selected units or multiple of the monitored data (on the LED monitor) are displayed on the top line of the LCD monitor. The „ symbol indicates selected units or multiple number. The symbol ▲ indicates there is an upper screen not currently displayed.

LCD monitor:

Used to display such various items of information as operation status and function data. An operation guide message, which can be scrolled, is displayed at the bottom of the LCD monitor.

This LCD monitor has a backlight feature which turns on when the control power is applied or any keypad key is pressed, and stays on approximately 5 minutes after the last key stroke.

Indication on LCD monitor:

Displays one of the following operation status:

FWD: Forward operation	REV: Reverse operation
STOP: Stop
Displays the selected operation mode:
REM: Terminal block	LOC: Keypad panel

COMM: Communication terminal

JOG: Jogging mode

The symbol ▼ indicates there is a lower screen not currently displayed.

RUN LED :

Indicates that an operation command was input by pressing the FWD or REV key.

Table 4-1-1 Functions of operation keys

Operation key Main function

PRG	Used to switch the current screen to the menu screen or switch to the initial screen in
	the operation/trip mode.

	Used to switch the LED monitor or to determine the entered frequency, function code,
FUNC
DATA	or data.

∧ , ∨ Used to change data, move the cursor up or down, or scroll the screen

	Used to move the cursor horizontally at data change. When this key is pressed with
SHIFT
>>	the up or down key, the cursor moves to the next function block.

		Used to cancel current input data and switch the displayed screen. If an alarm
RESET		occurs, this key is used to reset the trip status (valid only when the alarm mode initial
		screen is displayed).
STOP +	∧	Used to switch normal operation mode to jogging operation mode or vice versa. The
		selected mode is displayed on the LCD monitor.

			Switches operation mode (from keypad panel operation mode to terminal block
	+		operation mode or reverse). When these keys are operated, function F01 data is also
STOP		RESET
			switched from 0 to 1 or from 1 to 0. The selected mode is displayed on the LCD
			indicator.

4-1