Fuji Bikes 5000G11S/P11S Switching the LED monitor, Menu screen, Setting function data

4-3-3 Switching the LED monitor

On the normal operation, press					FUNCDATA	to switch to LED monitor display.
When power is turned on, the				monitor contents set by the function (E43) are displayed on the LED.
		When stopping						When running	Unit	Remarks
	E43	(E44 = 0)	(E44 = 1)					(E44 =0,1)
	0	Setting frequency	Output frequency 1					(before slip compensation)	Hz
	1	Setting frequency	Output frequency 2 (after slip compensation)
	2	Setting frequency				Setting frequency
	3	Output current				Output current			A
	4	Output voltage	Output voltage (specified value)						V
		(specified value)
	5	Synchronous			Synchronous speed				r/min.	For 4 digits or more, the last
		speed setting								digits are cut, with x10, x100
		value
										marked on the indicator.
	6	Line speed setting					Line speed		m/min.
		value
	7	Load rotation			Load rotation speed				r/min.
		speed setting
		value
	8	Torque calculation			Torque calculation value				%	± indication
		value
	9	Power			Power consumption				kW
		consumption
	10	PID setting value				PID setting value			−	Displayed only when PID is
	11	PID remote setting			PID remote setting value				−	effective in PID operation
		value								selection.
	12	PID feedback			PID feedback value				−
		value

4-3-4 Menu screen

The “Program menu” screen is shown below. Only four items can be displayed simultaneously. Move the cursor with ∧ or ∨ to select an item, then press FUNCDATA to display the next screen.

1.DATA SETTING 2.DATA CHECK 3.OPR MNTR 4.I/O CHECK ⇒5.MAINTENANC 6.LOAD FCTR 7.ALM INF 8.ALM CAUSE 9.DATA COPY

Display

4.I/O CHECK ⇒5.MAINTENANC 6.LOAD FCTR 7.ALM INF

4-3-5 Setting function data

On the “program menu” screen, select "1. Data Setting" then the “Function Select” screen appears with function codes and names on it. Select the desired function.

60.00

RUN

PRG⇒PRG MENU F/D⇒LED SHIFT

PRG

60.00

⇒1.DATA SETTING 2.DATA CHECK 3.OPR MNTR 4.I/O CHECK

FUNC

DATA

60.00

F00DATA PRTC

F01FREQ COM 1

F02OPR METHOD

F03MAX Hz-1

FUNC

DATA

60.00

F01FREQ COM 1

0

0 − 11

Function code Function name Data setting range Data

4-5