Gateway p-79 manual Replacing the touchpad button board, Replacing notebook components

Models: p-79

1 198
Download 198 pages 10.95 Kb
Page 118
Image 118
Replacing the touchpad button board

CHAPTER 3: Replacing notebook components

Replacing the touchpad button board

Tools you need to complete this task:

v

Flat-blade driver

- OR -

Scribe or non-marring tool

Phillips #0 screwdriver

Screws removed during this task:

2 black M2.5×3 (Keyboard cover)

6 black M2.5×8 (LCD front panel)

Manual backgroundManual backgroundManual background 3 black M2.5x3 (Keyboard)

Manual backgroundManual background 2 long black (Keyboard)

Manual backgroundManual background 2 black M2.5×8 (Hinge bottom)

Manual backgroundManual background 2 black M2.5×8 (Hinge top)

8 black M2.5×8 (Palm rest-bottom)

6 black M2.5×8 (Palm rest-top)

Manual backgroundManual backgroundManual background 3 black M2.5×5 (Palm rest-top)

4 black M2.5×3 (Touchpad board bracket)

Manual backgroundManual background 2 chrome M2×3 (Touchpad button board bracket)

Manual background To replace the touchpad button board:

1Complete the steps in “Preparing the notebook” on page 57.

2If the notebook has wireless networking built in, unplug the wireless antennas by following the steps in “Replacing the IEEE 802.11 wireless card” on page 65.

3Remove the hard drive by following the steps in “Replacing the hard drive” on page 69.

4Remove the keyboard cover by following the steps in “Replacing the keyboard cover” on page 75.

5Remove the keyboard by following the steps in “Replacing the keyboard” on page 78.

6Remove the LCD assembly by following the steps in “Replacing the LCD assembly” on page 90.

7Remove the palm rest by following the steps in “Replacing the palm rest” on page 104.

8Remove the touchpad board bracket by following the steps in “Replacing the touchpad board” on page 108.

112

Page 118
Image 118
Gateway p-79 manual Replacing the touchpad button board, Replacing notebook components