Gateway p-79 manual Replace the LCD panel assembly screws removed in Step

www.gateway.com

8Lift the inverter from the LCD panel assembly, then turn it over. Take note of the latch securing the inverter.

9Disconnect the connectors from the old inverter and connect them to the new inverter.

10Align the new inverter with the screw holes, then replace the screws removed in Step 7.

11Press the LCD panel front and back together. Press the two halves together in several places until they click in place. You should find no loose spots or spots where the two halves do not meet.

Important

If the LCD front panel backing have a double-sided tape when removing, don’t forget to replace it with a new one when putting back.

12Replace the LCD panel assembly screws removed in Step 5.

13Replace the rubber inserts removed in Step 4.

14Replace the keyboard cover by following the steps in “Replacing the keyboard cover” on page 75.

83