Gateway p-79 Replacing the keyboard cover, Complete the steps in “Preparing the notebook” on page

www.gateway.com

Replacing the keyboard cover

Tools you need to complete this task:

v

Flat-blade driver - OR - Scribe or non-marring tool

Phillips #0 screwdriver

Screws removed during this task:

• 2 black M2.5×3 (Keyboard cover)

To replace the keyboard cover:

1Complete the steps in “Preparing the notebook” on page 57.

2Remove the two keyboard cover screws from the inside of the battery compartment.

3Use a plastic screw driver to release the latches.

4Turn your notebook over so the top is facing up.

5Open the LCD panel to the fully opened position.

75