www.gateway.com
Replacing the IEEE 802.11 wireless card
Tools you need to complete this task:
Phillips #0 screwdriver
Screws removed during this task:
•
2 blackM2x3 (IEEE 802.11 wireless card)
To replace the IEEE 802.11 wireless card:
1Complete the steps in “Preparing the notebook” on page 57.
2Loosen the memory bay cover screws (these screws cannot be removed).
3Use the thumb notch to lift the memory bay cover, then remove it. Be careful not to break off the tabs located on the end of the cover opposite the thumb notch.
65
