Gateway p-79 manual Pull the memory module out of the slot

Models: p-79

1 198
Download 198 pages 10.95 Kb
Page 65
Image 65
5Pull the memory module out of the slot.

www.gateway.com

4If you are removing a module, gently press outward on the clip at each end of the memory module until the module tilts upward.

5Pull the memory module out of the slot.

6Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay.

7Press the card down until it clicks into place.

8Replace the memory bay cover, then tighten the cover screws.

59

Page 65
Image 65
Gateway p-79 manual Pull the memory module out of the slot, Press the card down until it clicks into place