Guardian Technologies VISTA-40, N7001V2 J7 Connector for Voltage Triggers, 27 Ð

Compatible 5800 Series Wireless Devices

(Refer to the installation instructions provided with each transmitter)

5801	4-Button Transmitter
5802	Pendant Panic Transmitter
5802CP	Belt Clip Panic Transmitter
5802MN	Belt Clip or Pendant Panic Transmitter
5804	4-Button transmitter
5806	Photoelectric Smoke Detector
5807	Photoelectric Smoke Detector
5808	Photoelectric Smoke Detector
5816	Miniature Transmitter
5816MN	Miniature Transmitter
5816TEMP	Low Temperature Transmitter
5817	3-Point Transmitter
5818	Recessed Transmitter
5827	Wireless Keypad
5849	Glass Break Detector
5890	Dual Element PIR

VOLTAGE TRIGGERS (Connector J7)

(Ground Start Module, Keyswitch, Remote Keypad Sounder, or a non-Ademco AAV Unit requiring a Voltage trigger)

General Information	Connector J7, located on the right hand side of the main PCB provides 4 latching
	trigger outputs for operating the 675 Ground Start Module, the 4146 Keyswitch,,
	a non-Ademco AAV unit, a remote keypad sounding piezo, and for triggering
	auxiliary alarm signaling equipment (such as the 7720 and 7920SE LORRA
	Subscriber Radios). Note that these output triggers can be enabled by partition
	via programming field 2*20.
	The pin assignments of this connector are shown below. Use only the 4142TR
	9-wire cable (available as an option) for making connections to this connector.

1 2 3 4 5 6 7 8 9

N/U

GRAY		YELLOW	WHITE		RED	GREEN		BROWN	BLUE		BLACK
GROUND	OUT	1	GROUND	OUT	2	GROUND	OUT	3	GROUND	OUT	4

J7 CONNECTOR

J7 CONNECTOR FOR VOLTAGE TRIGGERS

4142TR CABLE

OUT 1: GROUND START OR OPEN/CLOSE

OUT 2: FIRE OR KEYSWITCH ARMED LED

OUT 3: BURGLARY/AUDIBLE PANIC/AUXILIARY

OUT 4: SILENT PANIC/DURESS OR KEYSWITCH READY LED

Output 1: Operates, by default, as a trigger for the 675 ground start module. This output may optionally be programmed via field 1*46 to operate as an open/close trigger, a remote keypad sounder output , or a trigger for an AAV unit from another manufacturer, as follows:

1*46 0 = ground start module

1 = open/close trigger

2 = remote keypad sounding

3= AAV trigger (non-Ademco AAV unit only!) Only one of these options may be used at any time.

Rating: When Activated: 10Ð13.8 VDC through 4K ohms (2.5mA max).

When De-activated: 100 ohms to ground.

(Continued on next page)

Ð 27 Ð