Guardian Technologies VISTA-40 Phone No, Download ID No, Touch-Tone, Or Rotary Dial, Primary

Downloader Options

*35	Download	This field is applicable only if downloading will be utilized. Enter the downloading
	Phone No.	phone number, up to 12 digits (0-9), or #11 (*), #12 (#), #13 (Pause). Do not fill
		unused spaces.
* 3 6	Download ID No.	Enter 00Ð09; A-F (10Ð15). Only applicable if downloading will be utilized. Make
		entries as 2-digit numbers as follows:
		00=0	03=3	06=6	09=9	12=C	15=F
		01=1	04=4	07=7	10=A	13=D
		02=2	05=5	08=8	11=B	14=E

*3 7 Download Command Enables

2nd PAGE FIELD

1*53 Download Callback

Each of the various remote (from the central station) functions can either be enabled or disabled. Disabling a function means that the central station will not be able to perform that function with respect to this system. Enter 1 to enable a function, and 0 to disable a function. See field 1*53 for Callback disable option. For UL installations, all entries must be 0.

Enter 1 if callback is not required when downloading. Enter 0 if callback is required. Must be 0 for UL.

Dialer Options

*30	Touch-Tone			Enter 1 if TouchTone service is being used. Enter 0 if rotary phone service is
	Or Rotary Dial			used.
				IMPORTANT!: Do not select a dialing method that is not legally permitted by
				the telephone company for the particular subscriber. If selecting touch-tone,
				make sure the subscriber has requested and is paying for touch-tone service.
				Note that whether or not touch-tone dialing for call placement is permitted,
				communication by the use of DTMF signaling (Ademco High Speed) will still take
				place. See field 1*33 for Touch-Tone w/Rotary backup.
* 3 1	PABX			This field is used to enter up to four 2-digit numbers 00-09; B-F (11-15). If not
	Access		Code	required, enter nothing and proceed to next address; otherwise, enter prefix
				needed to obtain an outside Telco line. This field may be used alternatively to
				enter a prefix that can suppress the Telco's call waiting feature from interfering
				with outgoing transmissions. This prefix is only useful if the Telco option to
				suppress call waiting has been obtained by your customer. The prefix to be used
				is 01010700 if rotary dialing is being used or 140700 if touch-tone dialing is being
				used. Each entry is a 2-digit entry so as to allow use of hexadecimal digits (B-F).
				Do not use hexadecimal digit A. Only enter digits required. Do not fill unused
				spaces.
*33	Primary			Enter the primary phone number, up to 12 digits, 0-9, or #11 (*), #12 (#), #13
	Phone		Number	(Pause). This is the phone number the control will use to transmit alarm and status
				messages to the central station. Do not fill unused spaces. Note that back-up
				reporting (8 calls are made to the secondary phone number if no
				acknowledgment is received after 8 attempts to the primary number) is automatic
				only if a secondary phone number is entered.
*34	Secondary			This field enables backup reporting if field *51 Dual Reporting and/or 1*34 Split
	Phone		Number	Reporting is not enabled. Enter the secondary phone number, up to 12 digits,
				0-9, or #11 (*), #12 (#), #13 (Pause). The secondary phone is the number that
				the control will use if communication on the primary number is unsuccessful. Do
				not fill unused spaces. If this field is programmed, a secondary subscriber account
				number (field *90) must also be programmed (can be the same as the primary
				account number).
* 4 0	Open/Close			Enter 1 if open/close reporting for the keyswitch is desired. Enter 0 if reporting is
	Reporting			not desired.
	For	Keyswitch
* 4 2	Dial	Tone Pause		This field sets the delay time for the Dial Tone Detect option, if true dial tone is not
				selected in that field. Enter the desired wait time for dial tone detection as follows:
				Enter single digit, 0 = 5 secs; 1 = 11 secs; or 2 = 30 secs. Must be 0 for UL.
				Ð 49 Ð