Guardian Technologies VISTA-40 LED indications are defined as follows Green Meaning, 29 Ð

A momentary short across this zone will arm the system in the "AWAY" mode. If the short is held for more than 3 seconds, the system will arm in the "STAY" mode. After the system has been armed, the next time zone 7 is shorted, the system will disarm.

An optional closed-circuit tamper switch (model 112) can be wired in series with zone 7, so that, if the switchplate is removed from the wall, the tamper will open, disabling keyswitch operation until the system is next disarmed from the keypad.

Notes:

¥Only one keyswitch with LEDs can be supported by the system's power supply.

¥Open/close reporting for keyswitch is enabled in field *40, and the keyswitch reports as user Ò0Ó.

¥If the keyswitch is used, trigger output 1 can still be used as previously described in VOLTAGE TRIGGERS section. Trigger outputs 2 & 4 are used to light the keyswitch LEDs as shown below.

¥If the keyswitch is used, zone 7 cannot be used as a protection zone.

LED indications are defined as follows:

Green	R e d	Meaning
ÊOff	Off	Disarmed & Not Ready
Ê O n	Off	Disarmed & Ready
ÊOff	On Steady	Armed Away
ÊOff	Slow Flash	Armed Stay
ÊOff	Rapid Flash	Alarm Memory

1 2 3 4 5 6 7 8 9 J7 CONNECTOR

N/U

GRAY

YELLOW

WHITE

RED

GREEN

BROWN

BLUE

BLACK

BROKEN LINES REPRESENT

GROUND

GROUND

GROUND

GROUND

INSTALLER WIRING CONNECTIONS

OUT

1

OUT

2

OUT

3

OUT

4

(ARMED)

(READY)

RED

GREEN

4142TR CABLE

TO AUX POWER

TERMINAL 6

820Ω

820Ω

TAMPER

IF KEYSWITCH IS USED.

SWITCH (N.C.)

1. OUT 1 CAN STILL BE USED TO

TO TERM 20

PROVIDE GROUND START,

s

OPEN/CLOSE (SEE FIELD 1*46).

LOCK

2. OUT 2, 3, 4 NO LONGER PROVIDE

TO ZONE 7

SWITCH (N.O.)

ALARM STATUS INDICATIONS. OUT 2

TO TERM 19

& 4 OPERATE KEYSWITCH LEDs. OUT

{s

3 IS NOT USED. ONLY 1 KEYSWITCH

CAN BE USED.

3. ZONE 7 IS NO LONGER USABLE AS A

2000

EOLR

PROTECTIVE ZONE.

OHMS

4146 KEYSWITCH

REMOTE KEYSWITCH WIRING

Ð 29 Ð