HP t5510 manual Specifying Characters

Setup Menus

Specifying Characters

There are various ways in which you can specify a particular character. For example, the ESC character can be specified using any one of the following five entries:

_027	Decimal value (underscore character followed by a 3-digit number).
\033	Octal value (backslash character followed by a 3-digit number).
\u001B	Unicode value (backslash and u characters then unicode value).
^[	Control key value (^ represents the control key on the keyboard).
\e	Additional value for ESC.
The following 'backslash' values can be used:
	\u	Unicode introducer	\r	Carriage return
	\n	Line feed	\e	Escape

Note that as the \ and ^ characters are used as value introducers, to enter these as character values you need to precede them with a backslash character, i.e. enter \ as \\ and ^ as \^.

The Euro character can be specified by entering the unicode value \u20ac.

5-72