TA6530 Emulation
12
TA6530 Emulation
This chapter describes features of the Tandem 6530 terminal emulation.
Session Configuration
WBT Mode
This section describes the basic procedure for creating a session configuration when the terminal is in WBT mode. The options available are described in detail in chapter 2.
1.Click the Configure tab in the Terminal Connection Manager then click the Add button to display the New Connection dialog box.
2.Select Terminal Emulation Client and click OK. The Terminal Emulation Client Connection Wizard - Connection Information dialog box will be displayed.
3.Enter a name which will identify this session configuration for future selection in the Connection Name box.
4.Select the TA6530 terminal emulation in the Emulation list box.
5.Click Next to display the Host Information dialog box.
For a TCP/IP connection, click the TCP/IP button, enter the name or internet address of the host computer in the Host Name box, then click Advanced for additional Telnet options. Refer to the TCP/IP Connection Settings section in chapter 2 for details.
For a modem connection, click the Modem button then click Advanced to display configuration options. Refer to the Modem Connection Settings section in chapter 2 for details.
For a serial connection, click the Serial button, specify the communications port in the Connect To box, then click Advanced for additional serial options. Refer to the Serial Connection Settings section in chapter 2 for details.
