Setup Menus

Auto LF

Factory default: Unselected

The setting of this option in conjunction with that of the Auto New Line option determines the destination of the cursor when the Return key is pressed or the CR character is received.

When both this and the Auto New Line options are unselected, the cursor will move to the first position of the current line when the Return key is pressed or the CR character is received.

When this is unselected and Auto New Line is selected, the cursor will move to the first position of the next line when the Return key is pressed.

When this is selected and Auto New Line is unselected, the cursor will move to the first position of the next line when the Return key is pressed or the CR character is received.

When both this and the Auto New Line options are selected, the cursor will move to the first position of the line after the next line when the Return key is pressed.

Auto New Line

Factory default: Unselected

The setting of this option determines the effect of pressing the Return key.

When unselected, the Return key will generate a CR (carriage return) character.

When selected, the Return key will generate a CR and an LF (line feed) character.

Terminal ID

Factory default: Unspecified

This specifies what is reported back to the host in response to a terminal identification request. The terminal ID can be up to 20 characters long. (Note that not all features of the specified terminal may be supported.)

Model

Factory default: 11

This option identifies the terminal model being emulated in response to a terminal identification request from the host. Model 11 supports only one viewport containing 24 or 25 rows and 80 columns. Model 31 supports up to three viewports (80 or 132 columns wide) and pass-through printing.

5-31