Host Command Summary
Wyse Emulations
ATTRIBUTES
Assign character display attribute | ESC G *attribute |
Assign line attribute | ESC G *line attribute |
Assign | ESC ' *attribute |
Line attribute mode on | ESC e 3 |
Page attribute mode on | ESC e 2 |
Wyse 60 character attribute mode on | ESC e 1 |
Wyse 60 character attribute mode off | ESC e 0 |
CHARACTER SETS (WY-60 only)
Define & load soft character |
| ESC c A *b *p *...*c CTRL Y | |
*b = bank | |||
*...*c = character bit pattern |
| ||
Automatic font loading enabled |
| ESC e O | |
Automatic font loading disabled |
| ESC e N | |
Load font bank with predefined character set | ESC c @ *bank *set | ||
Bank: 0 = Bank 0, 1 = Bank 1, 2 = Bank 2, 3 = Bank 3 |
| ||
Set: Native mode | @ | Standard ANSI | G |
Multinational | A | ' | |
Standard ASCII | B | a | |
Graphics 1 | C | b | |
PC Equivalent | D | c | |
Graphics 2 | E | d | |
Graphics 3 | F |
|
|
Clear font bank (* = 0 - 3) |
|
| ESC c ? * |
Specify font bank for primary character set (* = 0 - 3) | ESC c B * | ||
Specify font bank for secondary character set (* = 0 - 3) | ESC c C * | ||
Select primary character set for display | ESC c D | ||
Select secondary character set for display | ESC c E | ||
CLEARING DATA |
|
|
|
|
|
|
|
Clear cursor column |
|
| ESC V |
Clear entire rectangle in 80 column page | ESC c H *line *col *character | ||
Clear entire rectangle in 132 column page | ESC c H *line ~ *col *character | ||
Clear page to nulls |
|
| ESC * |
Clear page to spaces |
|
| ESC + |
Clear page to |
| ESC , | |
Clear unprotected column to nulls |
| ESC c K | |
Clear unprotected column to specified character | ESC c I *character | ||
Clear unprotected line to nulls from cursor | ESC t | ||
Clear unprotected line foreground to nulls from cursor | ESC c S | ||
Clear unprotected line to spaces from cursor | ESC T | ||
Clear unprotected line foreground to spaces from cursor | ESC c R | ||
Clear unprotected page to attribute character | ESC ! | ||
