![](/images/new-backgrounds/1212871/212871565x1.webp)
Host Command Summary
AIXTerm Emulation
All commands are supported in both VT100 and HFT (High Function Terminal) modes unless indicated otherwise.
SINGLE BYTE CONTROLS
Bell | BEL |
Backspace | BS |
Horizontal tab | HT |
Linefeed | LF |
Vertical tab | VT |
Form feed | FF |
Carriage return | CR |
Shift out | SO |
Shift in | SI |
Device control 1 | DC1 |
Device control 3 | DC3 |
Cancel | CAN |
Substitute | SUB |
Escape | ESC |
CHARACTER ATTRIBUTES
Assign * attribute(s) to following characters | ESC [ * m |
Normal | 0 |
Bold | 1 |
Underscore | 4 |
Blink (appears bold) | 5 |
Reverse | 7 |
Invisible (HFT) | 8 |
Foreground colours (HFT) | 30...37 |
Background colours (HFT) | 40...47 |
Foreground colours (HFT) | 90...97 |
Background colours (HFT) | 100...107 |
CHARACTER SET SELECTION
United Kingdom character set G0 (VT100) | ESC ( A |
United Kingdom character set G1 (VT100) | ESC ) A |
United Kingdom character set G2 (VT100) | ESC * A |
United Kingdom character set G3 (VT100) | ESC + A |
ASCII (USASCII) character set G0 (VT100) | ESC ( B |
ASCII (USASCII) character set G1 (VT100) | ESC ) B |
ASCII (USASCII) character set G2 (VT100) | ESC * B |
ASCII (USASCII) character set G3 (VT100) | ESC + B |
Special graphics character set G0 (VT100) | ESC ( 0 |
Special graphics character set G1 (VT100) | ESC ) 0 |
Special graphics character set G2 (VT100) | ESC * 0 |
Special graphics character set G3 (VT100) | ESC + 0 |
Single shift G2 (VT100) | ESC N |
Single shift G3 (VT100) | ESC O |