HP 700-92/96 Emulation

Buttons & Function Keys

The buttons along the bottom of the HP 700-92/96 window indicate the current function of keys F1 through F8 on the keyboard, each key and equivalent button having several functions within the emulation. The buttons and equivalent function keys enable selection of various operating modes and display configurations. Clicking a button has the same effect as pressing the equivalent F# key. When a key or button is attributed an on/off toggle action, the button will display an asterisk when the function is selected.

The middle button displays the row and column position of the cursor. It has no other function.

On entering HP 700-92/96 mode, the buttons and function keys enable various operating modes to be selected. The buttons will show the Mode Selection configu- ration.

Mode Selection

The Mode Selection functions are displayed when the HP 700-92/96 emulation is first entered. If the functions are changed while using the emulation, you can redisplay the Modes menu by pressing the F9 key (the equivalent of the HP 700-92/ 96 User System key), then F4.

Line Modify - F1

This function enables you to edit and retransmit an incorrectly entered command string when the emulation is in Remote mode and Character mode and you are communicating interactively with the host. This saves you having to retype the entire string again.

Note: This will not function when the emulation is in Block or

Format mode.

When the host causes an error message to be displayed indicating that the string has been incorrectly entered, press the F1 key or click the equivalent button. An asterisk will appear on the button indicating that the function is selected. Move the cursor to the line containing the error, edit the line then press Return or Enter. This will cause the edited string to be transmitted and Line Modify mode to be exited.

If after activating Line Modify mode you wish to cancel it, just press F1 or click the button again.

8-5