Setup Menus
You can create multiple connection templates, any one of which can be selected for use. The procedure is as follows:
1.In the Saved Items box, indicate which settings are to be saved by checking the boxes next to the relevant options.
2.In the Save As File Name text box, enter a descriptive name to enable it to be identified for future selection. This description will be listed in the Open Session dialog box.
3.Click the OK button to save the template settings. If you specified a descriptive name that already exists, a message box will ask you to confirm whether or not you want to overwrite the existing name with the new settings.
Startup Options...
(Not available in WBT mode)
The following dialog box will be displayed when this option is selected.
This enables you specify whether the emulator is to make a host connection using the default connection template, display the New Connection dialog box, or display the Open Session dialog box when it is loaded (but not when it is reset). Refer to the relevant descriptions earlier in this section for information on these dialog boxes.
Printer Setup...
This will display a dialog box which enables you to specify print settings.
