Getting Started

When you achieve a TN3270E connection, the LU device name that you are connected as will be displayed on the status line. If the specified device is rejected by the server or host, then an error message box will be displayed indicating the reason.

Associate

This is available when the IBM 3270 Model option is set to 3287-1(a printer). It is used to request that the device name of the printer associated with a particular terminal is assigned to this Telnet session. The name of the terminal is specified here. (This is implemented as described in RFC 1647.)

TN3270E Options

TN3270E in implemented as described in RFC 1647. These options should not be changed unless required by your System Administrator.

The Bind setting determines whether or not the server is allowed to send the SNA Bind image and Unbind notification to the emulator.

When Responses is selected, positive and negative response handling is supported. It allows the server to reflect to the emulator any and all definite, exception, and no response requests sent by the host application.

When SysReq is selected, some (or all, depending on the server) of the functions of the SysReq key will be emulated and the server in an SNA environment.

The LU1 and LU3 Printer options are available when the IBM 3270 Model option is set to 3287-1(a printer). They enable you to specify which printer type(s) to support.

2-13

Page 23
Image 23
HP t5510 manual Associate, TN3270E Options