| This soft copy for use by IBM employees only. | ||
|
| ||
EISA Configuration Utility | Help=F1 | ||
Steps in configuring your computer
Step 1 : Important EISA configuration information
Step 2 : Add or remove boards
Step 3 : View or edit details
Step 4 : Examine switches or print report
Step 5 : Save and Exit
Select=Enter | <Cancel=ESC> |
| ||
Figure 3. EISA | Configuration | Utility - Steps | ||
If you are not familiar with the ISA and EISA cards, you can read the information in step 1; otherwise, you can skip to step 2.
A panel similar to the one in Figure 4 will appear.
|
| ||
EISA Configuration Utility | Help=F1 |
Listed are the boards and options detected in your computer.
.Press INSERT to add the boards or options which could not be detected or which you plan to install
.Press DEL to remove the highlighted board from your configuration
.Press F7 to move the highlighted board to another slot
.Press F10 when you have completed the step
System | IBM Dual Pentium PCI EISA System Board |
Slot 1 | IBM Auto 16/4 |
Slot 2 | (Empty) |
Slot 3 | (Empty) |
Slot 4 | (Empty) |
Slot 5 | (Empty) |
Slot 6 | (Empty) |
Embedded | PCI SCSI Controller |
|
| ||
Figure | 4. EISA Configuration Utility - Adding or Removing Boards | ||
10PC Server and Windows NT Integration Guide
