This soft copy for use by IBM employees only.
2.5 RAID Adapter Utilities
On PC Servers with SCSI RAID adapters, the RAID utility is used to configure the attached SCSI devices. This section describes two of the utilities used on IBM PC Servers:
1.The utility for the IBM
2.The utility for the PC ServeRAID SCSI Adapter. Refer to 2.5.2, ªPC ServeRAID SCSI Adapterº on page 49.
2.5.1SCSI-2 F/W PCI RAID and Streaming RAID Adapter
This utility comes on a bootable diskette that is shipped with every RAID Server. Also, it can be rebuilt if necessary with the Diskette Factory option from the ServerGuide.
The IBM RAID utility allows you to configure disk arrays as well as view the status of the arrays already defined. It provides a graphical display of the defined arrays and provides diagnostic information to assist you if a hard disk within the array malfunctions.
The common configuration tasks that are described here are as follows:
1.Verify the configuration
2.
3.Defining a
4.Creating a disk array
5.Defining logical drives
6.Look at the drives information
7.Back up/restore the configuration
After booting with the RAID Controller program diskette, if more than one RAID adapter is installed, it will prompt you to select the adapter you want to work with (see Figure 26 on page 37). Otherwise, a panel similar to the one in Figure 27 on page 37 will appear.
36PC Server and Windows NT Integration Guide
