This soft copy for use by IBM employees only.
|
| ||||
IBM PC ServeRAID Adapter Disk Array MiniConfiguration Utility | Ver. 2.00 | ||||
|
|
| |||
| Main Menu |
|
| ||
|
|
| |||
| View Adapter Status |
|
| ||
| View Configuration |
|
| ||
| Advanced Functions |
|
| ||
| Exit |
|
|
| |
|
|
| |||
Select a choice using the Up and Down Arrow keys, then press Enter. | ||
|
Figure 44. ServeRAID Adapter Mini-Configuration Utility
As well as viewing both the adapter status and the logical drive configuration, you can perform a subset of administrative functions that you can do with the configuration utility. Selecting Advanced Functions from the menu gives you a window:
Advanced Functions
Reset Adapter | |
Initialize Configuration | |
Import Configuration from Drive(s) | |
Boot | |
Adapter and PCI Information | |
Exit |
The options you can select here are:
•
•
Reset Adapter
The option resets the adapter and runs all internal diagnostics. This does not affect the data on the drives.
Initialize Configuration
This option resets the adapter configuration to factory defaults, and places all drives in the ready (RDY) state.
Note: All configuration data will be lost.
•Import Configuration from Drive(s)
This option reads the configuration from the drives and copies it to NVRAM and EEPROM on the adapter.
Note: Configurations store in the adapter will be lost.
•Boot CD-ROM and INT13 Extensions
Figure 45 on page 57 appears to allow you to configure the CD-ROM boot options. See ªBoot CD-ROM Configurationº on page 57for more information.
•Adapter and PCI Information
56PC Server and Windows NT Integration Guide
