This soft copy for use by IBM employees only.
6 IBM RAID Subsystem Diagnostic
Select this option to run the ServeRAID Adapter self test.
7 Init/View/Synchronize Config
This option lets you initialize the configuration of the adapter back to the factory defaults. The ServeRAID Adapter stores critical configuration information in a number of locations to ensure the data is not lost:
•
•
•
•
NVRAM on the adapter EEPROM on the adapter
On each online (ONL) or rebuilt (RBL) drive On diskette (upon request)
This option lets you view each of these stored configurations, and when a discrepancy exists, you can select which one to use as a basis for synchronization.
The RAID adapter also maintains a list of all changes to its RAID configuration. A
8 Display/Change Adapter Params
Select Display/Change Adapter Params to display the adapter′s status or to write a new adapter configuration Host ID. The adapter′s SCSI channel ID and speed may also be changed.
2.5.2.4 Mini-Configuration Utility
The
Upon booting the server with the ServeRAID controller installed, you will see:
Press <Ctrl+I> for MiniConfig Utility
If you have more than one adapter installed, you can select which adapter to work with. The main menu now appears (Figure 44 on page 56):
Chapter 2. H a r d w a r e Configuration 55