IBM SG24-4763-00 manual Set Features Menu, Set Configuration Scsi Device Configuration

					This soft copy for use by IBM employees only.
￿							￿
		Set and View SCSI Device Configuration
	SCSI Configuration Verification					[Enabled]
	Slot 1-IBM SCSI-2 Fast/Wide Adapter
	SCSI Address (ID)			...........................		7
	SCSI Device
		Device	type			Hard Disk
		Device	Address (ID,LUN)			6,0
		Device	size	...........................		540MB
		Presence error reporting				[Enabled]
	SCSI Device
		Device	Type			ROM Device
		Device	address (ID,LUN)			3,0
		Presence error reporting				[Disabled]
		Not present				[Keep]
	F1=Help	F3=Exit		F5=Previous	F6=Next	F10=Save
￿							￿

Figure 17. Set Configuration - SCSI Device Configuration

The Presence error reporting field on this panel works as follows:

•When presence error reporting is set to Enabled on a device, POST reports a configuration error if the device is disconnected or turned off.

•When presence error is set to Disabled on a device, POST does not check to see if the device is attached or turned on.

The Not present field instructs the system on what actions to take for an individual SCSI device that was previously configured but was not found during this discovery process. Using the Keep setting will cause the configuration program to leave the device in the configuration. Using the Remove setting will cause the device to be permanently removed from the configuration. To remove a SCSI device:

1.Locate the Not present field for the SCSI device you want to remove.

2.Highlight the Keep setting; then press F5 or F6 to change it to Remove.

3.Press F10 to save the changed setting.

2.4.1.6 Set Features Menu

When the user selects this option from the Main Menu, a panel similar to the one in Figure 18 on page 27 will appear.

26PC Server and Windows NT Integration Guide