IBM SG24-4763-00 manual Set Passwords and Security Features

This soft copy for use by IBM employees only.

￿7￿ Set power-on features

This panel lets you set the options for when and how the server can be started. It can be turned on automatically at a set time, or be turned on from a remote location through a modem.

When you select this option from the Set Features menu, a panel similar to the one in Figure 20 will appear.

￿					￿
	Set Power-On Features
	Serial-Port Power-On	mode	[Disabled]	￿A￿
	Real-Time-Clock Power-On mode		[Enabled]	￿B￿
	Power-On day of	the month	01
	Power-On time		12:00
	System-error restart		[Disabled]	￿C￿

￿	F1=Help	F3=Exit	F9=Toggle	￿
Figure	20. Set Power-On Features Panel

The features on this panel are described below:

￿A￿ Serial-Port Power-On Mode

This option allows you to start the server using a modem. When this option is enabled, the server starts when the modem detects an incoming call on the attached phone line.

￿B￿ Real-Time Clock Power-On Mode

When this option is enabled, the server will turn on when the present time matches the day and time values you have entered.

If you want the server to start only on a certain day of the month, type the date in the space provided. If you want the server to start every day, you must leave this field without a date. Figure 20 shows an example where the server will be powered on the fifth day of every month at 12:00 PM.

￿C￿ System-Error Restart

When the system-error restart feature is enabled, the server can automatically restart in situations that would normally result in the server stopping or locking up.

2.4.1.7 Set Passwords and Security Features

When you select this option from the Set Features menu (Figure 18 on page 27), a panel similar to the one in Figure 21 on page 30 will appear.

Chapter 2. H a r d w a r e Configuration 29