![](/images/new-backgrounds/1169970/16997051x1.webp)
This soft copy for use by IBM employees only.
The
Note
In order to take advantage of this option, verify that the autostart jumpers have been removed on hard drives. Otherwise, the drives will spin up twice: once at Power on Reset (POR) time and again when the adapter sends the start unit command.
5 Include in BIOS SCAN
This option determines whether the host adapter BIOS supports devices attached to the SCSI bus without the need for device driver software. When set to Yes, the host adapter BIOS controls the SCSI device. When set to No, the host adapter BIOS does not search the SCSI ID.
Notes:
1.The Send start unit and Include in BIOS Scan options have no effect if BIOS is disabled in the Advanced Configuration Options panel (see Figure 10).
2.Disabling the host adapter BIOS frees up
After completing the device configuration, there are a few more parameters that need to be configured. To do this:
•
•
•
Press ESC to quit the SCSI Device Configuration menu.
Use the arrow keys to select the Advanced Configuration Options menu. Press Enter.
A panel similar to the one in Figure 10 will appear.
Advanced Configuration Options
| ||
| ||
Reset SCSI Bus at IC Initialization | Enabled | |
|
Options listed below have NO EFFECT if the BIOS is disabled
| ||
Host Adapter BIOS (configuration utility reserves BIOS space) | Enabled | |
Support Removable disks under BIOS as Fixed Disks | Boot only | |
Extended BIOS translation for DOS drives > 1 GByte | Enabled | |
Display | Enabled | |
Multiple LUN support | Disabled | |
BIOS support for bootable | Enabled | |
BIOS support for Int13 Extensions | Enabled | |
Support for Ultra SCSI speed | Enabled | |
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
|
Figure 10. PC Server 320 SCSISelect Utility Program - Advanced Configuration
To modify the settings on this panel:
16PC Server and Windows NT Integration Guide