This soft copy for use by IBM employees only.

Figure 83. Completion of the Installation

Figure 83 shows the end of the installation process. In this dialog box you are reminded to run the security manager in order to prevent unauthorized users from gaining access to your server.

8. Reboot the server.

Failure to do so may cause unpredictable results.

For more information on the installation, refer to Systems Management from an NT Server Point of View, SG24-4723.

6.3.2 Installation of TME 10 NetFinity Manager

You would normally install either the active client or the manager code on your server. To install the TME 10 NetFinity Manager code on your server, use ServerGuide 3.0s CoPilot to install the code from CD-ROM. See 4.3.1, ªCoPilotº on page 75 for more information.

Alternatively, build the diskettes from ServerGuide 3.0s Diskette Factory, then run NETFINST from this first diskette. See 4.3, ªServerGuide Main Menuº on page 73 for more information about Diskette Factory.

The installation of the TME 10 NetFinity Manager is similar to the services installation, except that instead of being asked for the type of client, you are asked whether you want to use your manager with Web Enhancement support or without it. Refer to Figure 84 on page 111.

The Web Enhancement function enables you to access your TME 10 NetFinity Manager from any Web browser. Refer to Chapter 6 of Systems Management from an NT Server Point of View, SG24-4723, for more information about this function.

110PC Server and Windows NT Integration Guide

Page 120
Image 120
IBM SG24-4763-00 manual Installation of TME 10 NetFinity Manager, Completion of the Installation