This soft copy for use by IBM employees only.
•
•
•
•
Use the arrow keys to select the parameter to modify. Press Enter to edit the parameter.
Use the arrow keys to select the new value or press Esc to quit. Press Enter to validate the new value.
When finished:
•
•
•
•
Press Esc to quit the SCSI Advanced Configuration options menu. Press Esc to quit the Configuration menu.
Use the arrow keys to select the SCSI Disk Utilities. Press Enter.
A panel similar to the one in Figure 11 will appear.
Select SCSI ID Disk and Press <Enter> | ||||
|
|
| ||
SCSI ID #0 | : IBM | |||
SCSI ID #1 | : No device |
| ||
SCSI ID #2 | : No device |
| ||
SCSI ID #3 | : IBM | CDRM 00203 | ||
SCSI ID #4 | : No device |
| ||
SCSI ID #5 | : No device |
| ||
SCSI ID #6 | : No device |
| ||
SCSI ID #7 | : | |||
SCSI ID #8 | : No device |
| ||
SCSI ID #9 | : No device |
| ||
SCSI ID #10 | : No device |
| ||
SCSI ID #11 | : No device |
| ||
SCSI ID #12 | : No device |
| ||
SCSI ID #13 | : No device |
| ||
SCSI ID #14 | : No device |
| ||
SCSI ID #15 : No device |
| |||
|
|
| ||
Figure 11. PC Server 320 SCSISelect Utility Program - DASD Information
This panel shows the devices that are attached to the adapter and their SCSI IDs. It will also allow you to perform a
•
•
Use the arrow keys to select the DASD to format. Follow the directions on the panel.
When finished:
•
•
Press Esc to quit the SCSI disk utility. Select Yes to confirm.
You have now completed the SCSI subsystem configuration.
Don′t forget to save changes before you exit.
2.4 System Partition Programs
If you have a PCI/MCA machine, you will run the system programs. The system programs are a set of utility programs you can use to configure the SCSI subsystem, system options, and I/O adapters. Also, you can use them to set passwords, change the date and time, and test the server. In effect, they are the equivalent of Setup, EISA Configuration and SCSISelect for a PCI/EISA machine.
Chapter 2. H a r d w a r e Configuration 17
