IBM SG24-4763-00 manual Auto-Detection of Network Adapters

This soft copy for use by IBM employees only.

Figure 68. Auto-Detection of Network Adapters

If your adapter is not auto-detected by setup, you may either select the adapter from the list provided by Setup or you need to provide a hardware manufacturer′s adapter support diskette. To select an adapter from the list, click on Select from list....

To load any drivers you have on diskette, click on Have Disk. You may get the following error message (Figure 69):

Figure 69. OEMSETUP.INF Not Found

This message is displayed if setup does not find the OEMSETUP.INF or OEMSETNT.INF file on the diskette′s root directory. To solve the problem, simply provide the correct path information to the OEMSETUP.INF or OEMSETNT.INF file. You may also skip the installation of one particular adapter, continue the NT 4.0 installation and add this particular adapter support at a later time. To continue, click on OK and provide the correct path information. A dialog box then displays the adapters supported by this driver diskette (Figure 70 on page 99).

98PC Server and Windows NT Integration Guide