This soft copy for use by IBM employees only.
5. Press any key to return.
Now that an array has been defined, it is necessary to create the logical drives on this array. Logical drive definitions for created arrays must be done before exiting the Create/Delete Array menu.
Notes:
1.Up to four arrays can be defined per controller.
2.An array can be defined across the two channels of one controller.
3.You cannot define an array across two controllers.
4.For maximum performance and configuration flexibility, all installed drives should be configured into a
2.5.1.5 Defining Logical Drives
1.Select Define Logical drive from the Create/Delete Array menu. The following panel appears:
IBM RAID Controller Configuration Ver 2.12
Adapter in Slot 1
Create/Delete Array
|
| Ch | 1 | Ch |
| 2 | |||||||
|
| 1. Help |
|
| Bay |
| Bay |
| |||||
|
| 2. Define | Array | Array | |||||||||
|
| 3. Delete disk array |
| ||||||||||
|
| 4. Create disk array |
| 1 | 1 | ||||||||
|
| 5. Define Logical drive | |||||||||||
|
| 6. Format drive |
| 2 | 2 | ||||||||
|
| 7. Exit |
|
| |||||||||
|
| 3 HSP | 3 | ||||||||||
|
|
|
|
|
| ||||||||
4 ONL A | 4 | ||||||||||||
Array Arrays | Log | Size RAID | Date | ||||||||||
ID | Size (MB) Drv | (MB) Level | Created | 5 ONL A | 5 | ||||||||
A | 6450 |
|
| 6 ONL |
| A | 6 | ||||||
|
|
| |||||||||||
|
|
| 7 |
| 7 |
| |||||||
Figure 36. RAID Configuration Program - Logical Drive Definition
2.Highlight the array to be defined and press Enter. The define logical drive
44PC Server and Windows NT Integration Guide
