Monitor cluster logfiles on NodeT if HACMP has been customized to monitor 7133 disk failures.

Since the 7133 disk is hot pluggable, remove a disk from drawer 1 associated with NodeF's shared volume group.

The failure of the 7133 disk will be detected in the error log ( errpt -a more) on NodeF, and the logical volumes with copies on that disk will be marked stale (lsvg -l NodeFvg).

Verify that all NodeFvg file systems and paging spaces are accessible ( df -k and lsps -a).

Plug the failed disk back in, then sync the volume group ( syncvg NodeFvg).

Verify that all NodeFvg file systems and paging spaces are accessible ( df -kand lsps -a) and that the partitions are not stale (lsvg -l NodeFvg).

6.2.5Application Failure

By default, HACMP does not recognize application failures. With some additional configuration, it is possible to “teach” HACMP application failures and trigger events (for more information see 2.6.2.3, “Application Failure” on page 47).

So, the way of testing application failures is strongly dependent on your configuration.

Before you start to do the configuration and the testing application failure notification, analyse your application for possible failures. Then try to reproduce them.

Cluster Testing 141

Page 159
Image 159
IBM SG24-5131-00 manual Application Failure