The ID of an SCSI adapter, by default, is 7. Since each device on an SCSI bus must have a unique ID, the ID of at least one of the adapters on a shared SCSI bus has to be changed.
The procedure to change the ID of an
1.At the command prompt, enter smit chgscsi.
2.Select the adapter whose ID you want to change from the list presented to you.
SCSI Adapter
Move cursor to desired item and press Enter.
scsi0 Available
F1=Help | F2=Refresh | F3=Cancel |
F8=Image | F10=Exit | Enter=Do |
/=Find | n=Find Next |
|
3.Enter the new ID (any integer from 0 to 7) for this adapter in the Adapter card SCSI ID field. Since the device with the highest SCSI ID on a bus gets control of the bus, set the adapter’s ID to the highest available ID. Set the Apply change to DATABASE only field to yes.
Cluster Hardware and Software Preparation | 79 |
