IBM Partner Pavilion 2.3 manual Type a series of individual IP addresses, a

Defining ports or assets to exclude from a scan

Use the Scan Exclusion policy on the SiteProtector Console to define the specific ports, specific assets, or both, that you want to exclude from a scan of a group of assets.

Procedure

1.From the SiteProtector Console, create a tab to display asset policies.

2.In the navigation pane, select a group, and then open the Scan Exclusion policy for that group.

3.Choose an option:

If you want to...	Then...
Exclude ports	Use a combination of typing the ports to
	exclude and choosing the ports:
	v Type the ports to exclude, separated by
	commas, in the Excluded Ports box.
	v Click Well Known Ports, and then select
	the ports to exclude.
Exclude assets	Type the IP addresses (in dotted-decimal or
	CIDR notation) of the hosts to exclude in the
	Excluded Hosts box:
	v Type an IP address, and then press ENTER.
	v Type a range of IP addresses, and then
	press ENTER.
	Example: 172.1.1.100-172.1.1.200
	v Type a series of individual IP addresses, a
	range of addresses separated by commas,
	or both, and then press ENTER.
	Note: A red box is displayed around the
	Excluded Hosts box until the data is
	validated.

Chapter 5. Background scanning in SiteProtector 87