4069-XXX
Hard Disk Option
Service Tip: The Optra T printers support one hard disk option. Check to make sure only one hard disk option is installed.
•2.1 GB or larger
Check to make sure the fixed disk and the fixed disk board are correctly installed. Run the “Quick Disk Test” on page
Note: The Quick Disk Test is a
The “Disk Test/Clean” on page
WARNING: This can be a very lengthy test depending on the disk size. This test leaves the hard disk unformatted. The servicer or user must reformat the disk using the Format Disk Menu operation. This is a destructive type of test. All the data on the disk is destroyed and should not be performed on a known good disk.
Network Card Option
Note: The network is installed on the controller board on network model printers.
Error Code 976 - Network Card X (X=Network card 1, 2, or 3)
A 976 error code indicates an unrecoverable software error in network card x. Verify that network card x is correctly installed in the socket on the interconnect board and is properly grounded. If you find no problem, contact your next level of support before replacing the network card.
Error Code 977 - Network Card X
A 977 error displays when the RIP software detects that a network card is installed in slot x on the interconnect board but cannot establish communications with the network card.
