Remove Paper - Output Bin X Full displays. You may not be able to clear the message.
| FRU | Action |
|
|
|
1 | Dual Output Bin Sensor Flag | Check the flag for correct operation, |
| (Upper Assembly) | binding, broken parts or interference |
|
| from the sensor cable. If incorrect, |
|
| repair as necessary. |
|
|
|
271 Paper Jam - Check Bin X. POST Incomplete | ||
| FRU | Action |
|
|
|
1 | Upper Pass Thru Sensor | Check the flag for correct operation, |
| Flag Assembly Upper | binding, broken parts or interference |
| Control Board | from the sensor cable. If incorrect, |
|
| repair as necessary. If correct, check |
|
| to make sure the lower pass thru |
|
| sensor is correctly connected to J3 on |
|
| the lower control board. Disconnect |
|
| the pass thru sensor cable and check |
|
| the voltage at |
|
| measures approximately +5V dc. If |
|
| incorrect, check the voltage at |
|
| The voltage measures approximately |
|
| 0V dc. If incorrect, replace the sensor |
|
| assembly. If this does not fix the |
|
| problem, replace the lower control |
|
| board. |
|
|
|
5-Bin Mailbox Service Check
Service Tip: The majority of the mechanical components can be observed during operation by removing the left, right side covers.
Models 010/010n and 010/01n at service level B do not support this output option.
Make sure the option(s) are correctly installed before attempting to service the unit. Be sure the option is correctly installed and the machine is configured correctly before attempting to service the unit.
