Tray X Low message displays when Tray X is full or has adequate paper in the tray.
| FRU | Action |
|
|
|
1 | Paper Low Sensor | Run the Tray X Sensor Test and |
| Assembly | check the sensor for proper |
| Paper Low Sensor Flag | operation. If incorrect, check the |
| Tray X Option System | following: |
| Board | Paper low sensor flag for smooth |
|
| |
|
| and correct operation. |
|
| Paper low sensor for correct |
|
| installation on the autocompensator |
|
| housing. |
|
| Paper low sensor cable for signs of |
|
| cuts, pinched wiring or other |
|
| damage especially at connector J5 |
|
| on the system board. |
|
| If no problem is found, replace the |
|
| paper low sensor assembly. If this |
|
| does not correct the problem, |
|
| replace the option system board. |
|
|
|
Tray X Empty message displays when Tray X has paper in the tray.
| FRU | Action | |
|
|
| |
1 | Paper Out Sensor Flag | Check the paper out sensor flag for | |
|
| correct operation and installation. If | |
2 | Paper Out Sensor (On | ||
correct, replace the option system | |||
| Option System Board) | board. (The paper out sensor is | |
|
| mounted on the system board). | |
|
|
|
