4069-XXX
Paper Feed Service Check
If you have a 936 Transport Motor Error go to the “Main Drive Service Check” on page
| FRU | Action |
|
|
|
1 | Alignment Assembly | Check to ensure the alignment |
|
| assembly is correctly attached to the |
|
| left side frame and the mounting |
|
| screws are tight. Check the |
|
| alignment assembly for any signs of |
|
| worn rollers, contaminated rollers or |
|
| binds. Replace the alignment |
|
| assembly if any problem is found. |
|
|
|
2 | Inner Deflector | Check the inner paper deflector for |
|
| correct installation. If the deflector is |
|
| bowed or not fitting correctly, replace |
|
| the deflector. |
|
|
|
Autocompensator fails to feed paper. Failures occur randomly throughout the stack of paper.
| FRU | Action |
|
|
|
1 | Pass Through Sensor | Check the pass through sensor for |
|
| correct installation and operation. |
|
|
|
2 | Autocompensator | The autocompensator pick roll shaft |
| Assembly | assembly is not providing enough |
|
| torque if the pick rollers are not |
|
| picking the paper correctly. Replace |
|
| the autocompensator assembly. |
|
|
|
3 | Wear Strips in Tray X | Check the wear strips for excessive |
| problem is found. | wear, scratches or rough spots. |
|
| Replace the wear strips if a problem |
|
| is found. |
|
|
|
