Ready Bin X Full message displays - May be able to clear message and will feed paper into Bin selected.
| FRU | Action |
|
|
|
1 | Bin X Sensor | Check the sensor and sensor cable for |
| Bin X Sensor Cable | the bin that is displaying the message |
| Bin X Sensor Flag | to make sure the sensor is seated |
| Control Board | correctly in the side of the tray and the |
|
| cable is connected to the sensor and |
|
| the control board. Check the flag for |
|
| binding and proper operation. If |
|
| correct, replace the Bin X sensor. If |
|
| this does not fix the problem, replace |
|
| the control board. |
|
| Note: This sensor is in a normally |
|
| open position with the flag out of the |
|
| sensor slot. |
|
|
|
Bin X is full - No message that Bin X is full displays | ||
|
|
|
| FRU | Action |
|
|
|
1 | Bin X Sensor | Check the sensor flag for binds, |
| Bin X Sensor Cable | broken or missing parts. If correct, |
| Bin X Sensor Flag | check the bin sensor for correct |
| Bin X Sensor Flag | installation in the side of the tray. If the |
| Control Board | bin sensor is installed correctly, check |
|
| the sensor cable for correct installation |
|
| to the sensor and control board. If |
|
| correct, replace the Bin X sensor. If |
|
| this does not fix the problem, replace |
|
| the control board. |
|
|
|
Ready - Bin X Full displays and paper feeds into Bin X | ||
|
|
|
| FRU | Action |
|
|
|
1 | Bin X Sensor | Check the sensor flag for binds. Make |
| Bin X Sensor Control Board | sure the sensor flag is not in an up |
|
| position. If the sensor flag is operating |
|
| correctly, replace the bin X sensor. If |
|
| this does not fix the problem, replace |
|
| the control board. |
|
|
|
