260 Paper Jam displays, envelope stops in feeder paper path.
| FRU | Action |
|
|
|
1 | Kick Rolls/Feed Rolls/Drive | Check all the rolls for any signs of oil, |
| Rolls | grease or other contamination. If you |
|
| find a problem, clean the rolls. If this |
|
| does not correct the problem, |
|
| replace the envelope feeder option. |
|
|
|
2 | Deflector Gap Adjustment | Check the deflector gap adjustment. |
|
| The adjustment may be too narrow. |
|
|
|
Envelope Feeder multifeeds or may not display a 260 Paper Jam message.
| FRU | Action |
|
|
|
1 | Envelopes | Check the envelopes being used in |
|
| the feeder. Check for signs of the |
|
| envelopes being stuck together or |
|
| signs of glue. Check to make sure |
|
| the flaps are not interleaved. |
|
|
|
2 | Deflector | Check the deflector gap adjustment. |
|
| The adjustment may be too wide. |
|
|
|
3 | Restraint Roll Bias Spring | Check for a missing, broken or |
|
| incorrectly installed restraint roll bias |
|
| spring. If incorrect, reinstall or |
|
| replace the spring. |
|
|
|
260 Paper Jam displays. An envelope stopped in the paper path of the feeder and an envelope also stopped in the base printer paper path.
| FRU | Action |
|
|
|
1 | Latch Lever | Check to make sure the tip of the |
|
| latch lever is centered in the opening |
|
| in the floor of the paper path. The |
|
| latch lever may not be detented on |
|
| the latch. |
|
|
|
