Lexmark 4069-XXX manual Integrated Tray Compensator Assembly

4069-XXX

Integrated Tray Compensator Assembly

1.Remove the paper tray.

2.Remove the left door.

3.Remove the inner EMC shield.

4.Disconnect the compensator motor cable (A) from the engine board.

5.Place the printer on its side.

6.Locate the integrated tray compensator assembly (B) on the bottom of the printer and disconnect the compensator arm bias spring from the frame.

7.Remove the c-clip that rests against the right sideframe from the autocompensator pivot shaft.

8.Disconnect the compensator sensor cable (C) from the assembly.

9.Remove the compensator assembly mounting screw (D). 10.Remove the integrated tray compensator assembly.

4-38Service Manual