4069-XXX
User Error Message | Explanation |
|
|
81 Engine Code CRC | This error displays when the microcode to be |
Failure | programmed in the engine flash code module has |
| failed a CRC check. Press Go to clear the |
| message. The microcode data is discarded and |
| must be |
|
|
88 Toner Low | This message displays when toner low occurs |
| and the toner low alarm is activated. Press Go to |
| clear this message. |
|
|
User Line 2 Messages
If none of the conditions exist that are listed in the following table, line 2 is blank. If any of the messages in the table are displayed the following actions can be taken:
Press Menu> or <Menu to take the printer offline and access the Ready Menu group.
Note: The Menu buttons are not active if Menu Lockout is turned on.
Press Stop to take the printer offline. The Not Ready message is displayed. No more data is processed from the host computer. Press the Go button to return the printer to the Ready state.
User Message | Explanation |
|
|
Toner Low | If the toner cartridge is low, then “Toner Low” |
| displays. The Toner Low condition clears |
| whenever the upper front door is opened, and |
| Toner Low displays again if the condition exists |
| after the upper front door is closed. |
|
|
Tray X Missing | If any of the input trays are missing, then “Tray X |
| Missing” displays (where X designates which Tray |
| (1 through 5) is missing. If multiple trays are |
| missing, they are prioritized in this order: Tray 1, |
| 2..., then tray 5. Tray X Missing status clears |
| whenever Tray X is reinserted. |
|
|
